Veteran Owned | Licensed & Insured | CFC1432855 | Serving Southwest Florida

Call
Email
Customer Portal
Southwest Plumbing Solutions - Logo 150x150
Request Service

Veteran Owned | Licensed & Insured | CFC1432855  Serving Southwest Florida

Email
Southwest Plumbing Solutions - Logo 150x150
Call
Request Service

Veteran Owned | Licensed & Insured | CFC1432855 | Serving Southwest Florida

Southwest Plumbing Solutions - Logo 150x150
Email
Request Service
Call
BACKFLOW TESTING & COMPLIANCE

Backflow Testing, Repair & Replacement Across Southwest Florida

Backflow prevention assemblies play an important role in protecting potable water systems from unwanted reverse flow through cross-connections.
Southwest Plumbing Solutions provides backflow testing and related plumbing services for applicable commercial, community and professionally managed properties throughout Southwest Florida.
Whether your property needs a scheduled backflow test, repair after a failed test or replacement of an existing assembly, SPS can help determine the appropriate service and next step.
Request Backflow Service
Call 239-406-3833
  • Veteran Owned
  • Licensed & Insured
  • CFC1432855
WHAT DOES YOUR PROPERTY NEED?

Start With the Backflow Service You Need

If you already know why you’re contacting SPS, choose the service below. If you’re unsure what is required, provide the property information and any notice or documentation you’ve received.

Backflow Testing

Have an existing backflow prevention assembly professionally tested.
Explore Backflow Testing

Failed Backflow Test

Your existing assembly did not pass testing and may require repair or additional evaluation.
Explore Backflow Repair

Backflow Repair

Repair an applicable existing backflow prevention assembly.
Explore Backflow Repair

Backflow Replacement

Evaluate replacement of an assembly that is damaged, failed or otherwise requires replacement.
Explore Backflow Replacement

Compliance Notice

You received a notice or testing requirement from a utility, property manager or other applicable authority.
Request Compliance Service

Not Sure What Is Required?

Send us the property information and any documents you received.
Request Backflow Evaluation

UNDERSTANDING THE SYSTEM

Water Should Move Through the Plumbing System in the Intended Direction

Backflow occurs when water or another substance moves in the reverse direction through a cross-connection and into potable water piping.
Backflow prevention assemblies are used in applicable plumbing systems to create protection against that unwanted reverse flow.
Because these assemblies contain mechanical components, testing helps determine whether the device is operating as required at the time of service.

Cross-Connections Create the Potential for Backflow

A cross-connection is a connection between potable water piping and another source or system that could introduce nonpotable water or other substances.

Backflow Preventers Provide a Physical Barrier

Mechanical backflow prevention assemblies are designed to help prevent unwanted reverse flow through applicable plumbing connections.

Mechanical Assemblies Require Testing

Internal components can wear, foul or otherwise stop operating as intended, which is why applicable backflow assemblies are subject to testing requirements.

PROPERTY-SPECIFIC REQUIREMENTS

Backflow Requirements Depend on the Property, Water System & Application

Not every property has the same backflow-prevention requirements. The applicable utility, type of water connection, use of the property and installed plumbing system can all affect what backflow protection and testing are required.
SPS should primarily market this service to properties where backflow assemblies are already installed or where the property owner has received a testing, repair or compliance requirement.
COMMON CUSTOMER TYPES

Commercial Properties

Businesses and commercial buildings with applicable backflow-prevention requirements.

HOAs & Community Associations

Community infrastructure and managed properties with installed assemblies requiring ongoing attention.

Property Management Companies

Managers responsible for coordinating testing, repairs and compliance across one or multiple properties.

Multifamily Properties

Applicable apartment, condominium and other multifamily plumbing systems.

Restaurants & Hospitality Properties

Applicable commercial water-service connections where backflow protection is required. The existing system is being replaced before a complete failure occurs.

Other Regulated Properties

Properties whose utility provider or applicable authority requires backflow protection, testing or corrective service.
Request Backflow Service
BACKFLOW TESTING

Confirm Whether the Existing Assembly Is Operating Properly

Backflow testing evaluates the operation of an installed backflow prevention assembly using appropriate testing procedures and equipment.
If the assembly passes, the applicable testing documentation can move forward according to the requirements of the property and water provider.
If the assembly does not pass, repair or replacement may be required before compliance can be completed.
Typical Price
Backflow Test
$175 / Device
Schedule Backflow Testing

A STRAIGHTFORWARD TESTING PROCESS

Test the Assembly. Document the Result. Determine the Next Step.

01

Identify the Assembly

Confirm the backflow assembly being tested and relevant property information.

02

Perform the Test

The assembly is tested using the appropriate equipment and procedure for the applicable device.

03

Determine the Result

The assembly either meets the applicable test requirements or requires corrective attention.

04

Complete Applicable Documentation

Testing information is documented according to the applicable SPS process and utility requirements.

05

Address Any Failed Components

If the assembly does not pass, SPS can determine whether repair or replacement is appropriate.
Request Backflow Testing
DID THE ASSEMBLY FAIL?

A Failed Test Doesn't Always Mean the Entire Assembly Needs Replacement

When a backflow prevention assembly does not pass testing, the appropriate next step depends on the condition of the device and what caused the failure.
Some assemblies may be repairable. Others may require replacement when the condition, damage or cost of repair makes replacement the more appropriate solution.
SPS can evaluate the result and explain the recommended corrective work before approved repairs begin.
Request Backflow Repair
Request Replacement Evaluation
BACKFLOW REPAIR

Correct an Applicable Assembly That Doesn't Pass Testing

Mechanical backflow assemblies contain components that can wear or require service over time.
When an existing assembly does not pass testing and the device remains appropriate for repair, SPS can complete the applicable corrective plumbing work based on the condition encountered.
The assembly may then require retesting as part of completing the applicable compliance process.
Typical Price
Backflow Repair
$395–$895
Request Backflow Repair
BACKFLOW REPLACEMENT

When Repair Is No Longer the Appropriate Solution

An existing backflow prevention assembly may require replacement because of damage, repeated problems, failed components or another condition identified during testing or evaluation.
SPS can evaluate the existing assembly and determine the appropriate replacement scope for the property.
The final project may depend on the device, connection size, installation configuration and requirements of the applicable water provider.
Typical Price
Backflow Replacement
$995–$3,995
Request Backflow Replacement
MATCH THE SERVICE TO THE CONDITION

Three Different Backflow Service Paths

BACKFLOW TEST

Purpose
Evaluate whether the existing assembly is operating as required.
Typical Price
$175 / Device
Schedule Testing

BACKFLOW REPAIR

Purpose
Correct an applicable existing assembly that requires service.
Typical Price
$395–$895
Request Repair

BACKFLOW REPLACEMENT

Purpose
Replace an applicable assembly when repair is not the appropriate solution.
Typical Price
$995–$3,995
Request Replacement Evaluation
COMPLIANCE REQUIREMENTS

Testing Requirements Can Vary by Water Provider & Property

Backflow compliance should not be treated as one universal requirement across every SPS customer.
Testing schedules, device requirements, documentation procedures and accepted testers can depend on the property’s water provider, location and plumbing application.
If you’ve received a testing or compliance notice, provide that information when requesting service so SPS can better understand the requirement associated with the property.

Helpful Documentation to Provide

  • Utility testing notice
  • Previous backflow test report
  • Backflow assembly information
  • Device location
  • Property address
  • Account or meter information when applicable
  • Previous repair documentation
  • Compliance deadline
Request Compliance Service

DON'T KNOW WHAT TO DO WITH THE NOTICE?

Send Us the Backflow Requirement You Received

Property owners and managers may receive testing notices or other backflow-related requirements from their water provider.
You do not need to interpret every technical detail before contacting SPS. Send us the notice, property address and any information available about the existing backflow assembly.Send us the notice, property address and any information available about the existing backflow assembly.
Our team can use that information to determine what service SPS can provide and what additional steps may be required.
Upload My Compliance Notice
Request Backflow Service
PLANNING YOUR SERVICE

Typical Prices for Backflow Services

The current SPS commercial pricing guide establishes the following backflow service prices.
Backflow Service Typical Prices
Backflow Test $175 / Device
Backflow Repair $395–$895
Backflow Replacement $995–$3,995

Typical Prices are provided as a general reference. Actual pricing may depend on the type and size of the assembly, condition, accessibility, materials, testing requirements and final scope of approved work.

The prices above are currently listed by SPS under Commercial Pricing.
MULTI-DEVICE PROPERTIES

Managing More Than One Backflow Assembly?

Commercial properties, associations and professionally managed locations may be responsible for multiple backflow prevention assemblies.
When requesting service, provide the approximate number of devices and any available documentation so SPS can better plan the testing or service request.

Helpful Information

  • Number of devices
  • Device locations
  • Property or community name
  • Previous testing reports
  • Current testing notices
  • Compliance deadlines
  • Known failed devices
  • Devices requiring repair
  • Devices requiring replacement
Request Multi-Device Backflow Service
MANAGED PROPERTY SUPPORT

A Clearer Way to Coordinate Backflow Service Across Your Property

Backflow compliance can become more complicated when a property manager or association is responsible for multiple assemblies, locations or testing deadlines.
SPS can serve as a plumbing resource for applicable testing, repair and replacement needs while helping the property manager keep each service request organized around the property and device involved.

Centralized Service Request

Submit applicable testing and repair needs through one SPS contact process.

Multiple Device Support

Provide a device list so testing requirements can be reviewed before scheduling.

Repair Follow-Up

Failed devices can be routed into repair or replacement evaluation.

Service Documentation

Maintain applicable SPS service records associated with the completed work.
Request Property Management Backflow Service
WHEN THE DEVICE NEEDS ATTENTION

A Backflow Problem Is Not Always Just a Testing Issue

An installed backflow assembly can be physically damaged, begin leaking or experience a mechanical problem that requires plumbing service rather than simply routine testing.
If you already know that the assembly is leaking, damaged or not operating correctly, tell SPS when requesting service.

Common Requests

  • Leaking backflow assembly
  • Failed backflow test
  • Damaged device
  • Known repair requirement
  • Replacement requirement
  • Device affected by vehicle or property damage
Request Backflow Repair
REQUEST BACKFLOW SERVICE

Tell Us About the Property & Backflow Assembly

Whether you need routine testing, received a compliance notice or already know that an assembly needs repair, provide the property information and tell us what service you need.
If you have a testing notice or previous report, upload it with the request.

239-406-3833

Call SPS Now


    Strongly recommended: utility notice, previous test report,
    photos of the assembly, device information, or property/device list.

    BACKFLOW SERVICE ACROSS SOUTHWEST FLORIDA

    Your Property Location Matters for More Than Scheduling

    SPS serves properties throughout its Southwest Florida service territory, but backflow requirements can also depend on the utility provider serving the property.
    Providing the complete property address allows SPS to identify the service territory and better understand which compliance requirements may apply.
    • NORTH REGION
    Sarasota | Charlotte | DeSoto

    Including communities such as:

    • Manasota Key
    • North Port
    • Englewood
    • Port Charlotte
    • Harbour Heights
    Explore North Region
    • SOUTH REGION
    Lee | Collier

    Including communities such as:

    • Estero
    • Bonita Springs
    • Fort Myers
    • Cape Coral
    • Babcock Ranch
    • Naples
    Explore South Region
    Backflow testing and compliance requirements should be confirmed based on the applicable utility or authority for the property
    View All Service Areas

    A STRAIGHTFORWARD BACKFLOW SERVICE PROCESS

    From Testing Requirement to Completed Service

    01

    Send Us the Property Information

    Provide the property address, type of backflow service needed and any testing or compliance documentation.

    02

    Confirm the Service Need

    SPS reviews whether the request involves testing, repair, replacement or another backflow-related service.

    03

    Test or Evaluate the Assembly

    The applicable testing or plumbing evaluation is performed.

    04

    Review the Result

    If the assembly passes, applicable documentation can move forward according to the required process. If the assembly fails, SPS explains the corrective service required.

    05

    Authorize Repairs When Needed

    Repair or replacement is separately approved based on the condition and pricing provided.

    06

    Complete Applicable Follow-Up

    Any required retesting or service documentation is completed according to the applicable SPS and utility process.
    Request Backflow Service

    MORE THAN BACKFLOW

    Need Additional Plumbing Support for the Property?

    Backflow testing may be only one part of the plumbing needs associated with a commercial or professionally managed property.
    Southwest Plumbing Solutions also provides commercial plumbing services for qualifying businesses, facilities and managed properties throughout Southwest Florida.
    Explore Commercial Plumbing
    View All Plumbing Services
    BACKFLOW QUESTIONS

    Frequently Asked Questions

    What is backflow?

    Backflow is the unwanted reverse movement of water or other substances through a cross-connection into potable water piping.
    Backflow prevention assemblies are used in applicable systems to help prevent that reverse flow.

    The current Typical Price is:
    $175 per device.
    This price is listed in the SPS owner’s pricing guide under Commercial Pricing.

    The current Typical Price is:
    $395–$895.
    Actual pricing depends on the assembly and condition identified.

    The current Typical Price is:
    $995–$3,995.
    Actual pricing depends on the assembly, size, installation and final scope.

    Testing requirements depend on the applicable water provider, property and assembly.
    Some utilities within the SPS service territory require annual testing for applicable devices, but customers should not assume that one testing schedule applies to every property.
    Provide the property address or compliance notice and SPS can review the service request accordingly.

    A failed assembly may require repair or replacement. SPS can evaluate the condition and explain the appropriate corrective service. Applicable retesting may then be required.
    No. Some backflow assemblies may be repairable. Replacement should be based on the condition of the assembly and the appropriate plumbing solution.
    Yes, customers can request testing or service for multiple devices. Provide the approximate number of assemblies and any available device list or documentation when contacting SPS.
    Yes. A utility or compliance notice can provide useful information about the property, device, deadline and applicable requirement.

    The current SPS pricing guide places Backflow Test, Repair and Replacement under Commercial Pricing.
    The service page should therefore primarily target businesses, associations, managed properties and other applicable properties while allowing individual property owners to request an evaluation when backflow service is required.

    Do not promise automatic electronic reporting or filing until SPS confirms its workflow and registrations with each applicable water provider. Testing documentation and submission procedures can differ by utility.
    Do not publish this claim until the owners provide the exact tester certifications or utility registrations SPS wants advertised. Where a utility requires testing by an approved or certified tester, the scheduled service must meet that utility’s applicable requirements.

    NEED A BACKFLOW TEST, REPAIR OR REPLACEMENT?

    Send Us the Property Information. We'll Help Determine the Next Step.

    Whether you’re scheduling routine testing, responding to a compliance notice or dealing with a failed or damaged backflow assembly, Southwest Plumbing Solutions can help with the appropriate plumbing service.
    Tell us where the property is located, what service is required and whether you have a testing deadline or compliance notice.
    Request Backflow Service
    Call 239-406-3833

    Additional Links

    Commercial Plumbing →
    Service Areas →
    View All Plumbing Services →